TORIC UHD 30mm 4-20X50 FFP MRAD PRS Long Range Rifle Scope - All Questions
TORIC UHD 30mm 4-20X50 FFP MRAD PRS Long Range Rifle Scope
Rating:
100%
$1,294.00
SKU
110
Hi, I was wondering if there is an estimate time for a warranty repair job? I'm extremely interested in this current model, however I'm just curious on time frames in the event something goes wrong.
I understand it is very difficult to estimate a time for an unknown issue, so we can just assume one of the dials is no longer tracking correctly.
Thanks! I can't wait to order (the back order until august is long!)
I understand it is very difficult to estimate a time for an unknown issue, so we can just assume one of the dials is no longer tracking correctly.
Thanks! I can't wait to order (the back order until august is long!)
Question by: Felix H Wynn on Apr 22, 2022, 1:53 PM
If the product can be repaired it is usually returned within 7-10 days. If it cannot be repaired it would be replaced immediately
Answer by: Jon LaCorte (Admin) on Apr 28, 2022, 11:36 AM
1 Item
Show per page
Customers Also Purchased
Check items to add to the cart or
- TORIC 30mm Accessory Kit - Includes 50mm Tenebraex covers, Bubble Level and Throw Lever$90.00Accessory kit for the TORIC 30mm riflescope includes everything you need to maximize your long range set up. Includes Tenebraex Tactical Tough Scope Covers, MK Machining Polymer Throw Lever and Bubble Level. Detailed specifications for each item included in the kit can be found on the individual item product pages. DOES NOT INCLUDE RINGS
- BASESAs low as $25.00Warne Maxima Steel Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available.
-
Warne Mountain Tech 30mm, Medium Height Sniper Grey Rings matches TORIC scopes$139.00Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat anodized Black Matte finish for abrasion and corrosion resistance. Rings feature stainless steel hardware for “Element Proof” protection. Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible. Provides a .990" clearance from where the ring meets the base to the centerline of the scope. - Tenebraex Tactical Tough Flip Open 50mm Scope cover kit for TORIC Rifle Scopes$70.00Tenebraex 50mm Tactical Tough Flip Covers provide protection for your scope's lenses keeping them clean and dry, and can conveniently flip up and lock back out of the way when it's time to shoot. Kit includes cover for eyepiece and objective. Fits TORIC 4-20X50 and 3-15x50 models. A full 360° of rotation means you can position your open covers exactly where you need them. Designed for the US Military and used by millions, these MIL-SPEC covers represent years of proven performance in the toughest environments. Will not fit the TORIC 34mm 4-25x50
- Scopecoat Neoprene Scope Cover - Medium - Fits all TRACT 30mm Rifle Scopes$24.00The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear. Pull tab allows for quick and easy removal. DOES NOT fit the TORIC 30mm 1-8X24 LPVO Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE!
- Riflescope Bubble Level - 1"$25.00The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 1-inch riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters.
- Scope Throw Lever - Fits most TORIC and TEKOA Rifle Scopes$25.00Upgrade your optic with one of these slick throw levers, speeding up magnification changes and target engagements without breaking the bank. Produced to exacting tolerances to match the magnification ring of your TRACT TORIC or TEKOA scope. Proudly printed in the USA by our friends at MK Machining from a durable Custom Nylon Blend and features a metal thread insert for increased strength when tightening. Install in a minute or less, and come with a lifetime warranty. Custom made to fit TORIC (34mm 4.5-30x56, all 30mm and 1" models) as well as all TEKOA scopes without removing the scope from the firearm. Will not fit the TORIC 34mm 4-25x50
- Mirage Cap - Fits TORIC 4-20X50 and 3-15X50 models$40.00Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-20X50 and 3-15X50 models
- LensPen$10.00The LensPen is the ultimate tool for removing dirt and grime from those hard to get to places on your optical lenses.
- Spudz Micro Fiber Cleaning Cloth$7.00Clip the lens cloth to your harness or sling to quickly and efficiently clean the dust from your binocular or riflescope.
- Warne Mountain Tech 30mm, Low Height Sniper Grey Rings matches TORIC scopes$139.00Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat anodized Black Matte finish for abrasion and corrosion resistance. Rings feature stainless steel hardware for “Element Proof” protection. Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible. Provides a .885" clearance from where the ring meets the base to the centerline of the scope.
- MDT Premier 30mm Medium Height Sniper Grey Rings matches TORIC scopes$139.00Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments Four oversized #8-32 Grade 8 fasteners used for clamping the scope MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
- MDT Premier 30mm High Height Sniper Grey Rings matches TORIC scopes$139.00Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments Four oversized #8-32 Grade 8 fasteners used for clamping the scope MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.25" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
- Warne Mountain Tech 30mm, High Height Sniper Grey Rings matches TORIC scopes$139.00Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance. Rings feature stainless steel hardware for “Element Proof” protection. Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible. Provides a 1.14" clearance from where the ring meets the base to the centerline of the scope.
