TORIC UHD 3-15X50 BDC Rifle Scope - All Questions

The Maxima Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a “no slip” positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place. Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails. Graphite Grey Color matches the TORIC rifle scopes. Height from bottom of the ring where it meets the scope tube to where it meets the base - .525" WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws

Tenebraex 50mm Tactical Tough Flip Covers provide protection for your scope's lenses keeping them clean and dry, and can conveniently flip up and lock back out of the way when it's time to shoot. Kit includes cover for eyepiece and objective. Fits TORIC 4-20X50 and 3-15x50 models. A full 360° of rotation means you can position your open covers exactly where you need them. Designed for the US Military and used by millions, these MIL-SPEC covers represent years of proven performance in the toughest environments. Will not fit the TORIC 34mm 4-25x50

The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear. Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE!

Upgrade your optic with one of these slick throw levers, speeding up magnification changes and target engagements without breaking the bank. Produced to exacting tolerances to match the magnification ring of your TRACT TORIC or TEKOA scope. Proudly printed in the USA by our friends at MK Machining from a durable Custom Nylon Blend and features a metal thread insert for increased strength when tightening. Install in a minute or less, and come with a lifetime warranty. Custom made to fit TORIC (34mm 4.5-30x56, all 30mm and 1" models) as well as all TEKOA scopes without removing the scope from the firearm. Will not fit the TORIC 34mm 4-25x50

Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-20X50 and 3-15X50 models

The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 1-inch riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters.

Clip the lens cloth to your harness or sling to quickly and efficiently clean the dust from your binocular or riflescope.

The LensPen is the ultimate tool for removing dirt and grime from those hard to get to places on your optical lenses.

The Maxima Horizontal Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a “no slip” positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place. Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails. Graphite Grey Color matches the TORIC rifle scopes. Height from bottom of the ring where it meets the scope tube to where it meets the base - .375" WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws