Customized to match your TORIC riflescope, the Graphite T-51 mount is the perfect complement to your AR/MSR. TRACT designers worked hand in hand with Warne engineers to develop the ultimate AR/MSR mount solution and the result is the RESPONSE mount. Made from lightweight precision machined 6061 aluminum the RESPONSE mount is the perfect match for your RESPONSE riflescope, but will work equally well with any brand riflescope on any flat top, Picatinny or Weaver rail. Base screws require 65in lbs of torque and come with a non permanent thread locking compound on the threads to eliminate the screws from working loose under repeated recoil. The ring screws require 25in lbs of torque. No thread locking compound is necessary on the ring screws. Weight - 6 ozs. Mount Height - Centerline of the ring to where it meets the base – 1.4” Buy Now
The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 34mm riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters. Buy Now
The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 30mm riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters. Buy Now
The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 1-inch riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters. Buy Now
Warne Mountain Tech rails offer shooters the advantage of a consistent mounting platform across multiple firearms, enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle.
Also fits:
-Bergara New 2018, Premier Short Action, Rem 700 Style W/8-40 Screws
-HS Precision Remington 700 Style Short Action (8-40 Screws)
-Remington 700 Police Short Action (8-40 screws)
Buy Now
Warne Mountain Tech 20 MOA rails offer shooters the advantage of a consistent mounting platform across multiple firearms, enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle.
Also fits:
-Bergara New 2018, Premier Short Action, Rem 700 Style W/8-40 Screws
-HS Precision Remington 700 Style Short Action (8-40 Screws)
-Remington 700 Police Short Action (8-40 screws)
Buy Now
Warne Mountain Tech 20 MOA rails offer shooters the advantage of a consistent mounting platform across multiple firearms, enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle.
Also fits:
-Bergara New 2018, Premier Short Action, Rem 700 Style W/8-40 Screws
-HS Precision Remington 700 Style Short Action (8-40 Screws)
-Remington 700 Police Short Action (8-40 screws)
Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning AB3 Long Action
-Browning AB3 Short Action
-HS Precision Savage Style Long Action (8-40 Screws)
-HS Precision Savage Style Short Action (8-40 Screws)
-Pierce Actions drilled for 8-40 screws
-Savage 110 BA (338 Lapua), 110 FCP (338 Lapua)
-Savage New 110 Long Action w/8-40 screws
-Savage New 110 Short Action w/8-40 screws Buy Now
Warne Maxima Steel Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available. Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Benelli R1, Argo
-Browning BAR, BAR II, Mark II
-Browning BPR (Pump), Mark l
-Sauer SHR Pro Hunter
-Savage 40, 45
-Winchester SXR
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.25" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.00" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.5" height (centerline of the ring to where it meets the base) The perfect height for full Picatinny rails and Flat Top AR's. Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.5" height (centerline of the ring to where it meets the base) The perfect height for full Picatinny rails and Flat Top AR's. Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Every TRACT riflescope features the ability to have a custom engraved turret to match your specific cartridge or load, which allows you to dial in the distance for long-range, precision shooting. We teamed up with Kenton Industries, the premier leader in turret technology, to provide highly accurate turret solutions for every TRACT riflescope. For more information on the available offerings, select the scope of your choice and then click on the turrets section to browse. Buy Now
The new GEN 2 Rapid-Release Tripod Adapter from our partners at Field Optics Research allows for quick and easy connect/disconnect of your binocular to your tripod. Unlike others, it can't fall off! This binocular tripod adapter will fit any brand binocular with a 1/4-20 connection. (usually hidden under a plastic cap in the hinge of your binocular). No QR plate is required with our 3-way base. Which easily fits any Arca Swiss, Manfrotto 200PL, and 1/4-20 mounting options.
Buy Now
2" sunshade threads easily into the objective of the TEKOA 44mm riflescope minimizing glare and reflections. Fits TEKOA riflescopes with a 44mm objective. Color : Black Matte Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look allowing the shooter to utilize the open sights by looking over the top of the bases when the scope is removed without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Fits:
Savage Axis, Axis ll, Edge w/6-48 screws Buy Now
4" sunshade threads easily into the objective of any 42mm RESPONSE riflescope minimizing glare and reflections. Fits 22 FIRE Riflescopes with a 40mm objective. Color : Matte Black
Will not fit the 22 FIRE 4-12X40 AO Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning BBR
-Cooey 71
-Enfield Winchester 70 Style
-Kimber Of Oregon M89 BGR
-Marlin XL-7
-Marlin XS-7
-Montana Montana action (Drilled and tapped round receiver)
-Sears 53
-Winchester 670, 770
-Winchester Model 70 Long Action
-Winchester Model 70 Short Action
-Winchester Model 70 WSM Buy Now
4" sunshade threads easily into the objective of any 42mm RESPONSE riflescope or the 22 FIRE 4-12X40 with Adjustable Objective minimizing glare and reflections. Fits RESPONSE Riflescopes with a 42mm objective and the 22 FIRE 4-12X40 with Adjustable Objective. Color : Matte Black Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look allowing the shooter to utilize the open sights by looking over the top of the bases when the scope is removed without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Fits:
Savage Axis, Axis ll, Edge w/6-48 screws Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning X-Bolt Long Action
-Browning X-Bolt Magnum Action: 300RUM, 300PRC, 375H&H
-Browning X-Bolt Short Action
-Browning X-Bolt Super Short Action Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
Henry Repeating Arms Lever Gun H009, H010, H014
Marlin 1894, 444, Glenfield 30, Zane Grey
Marlin 336, 336C, 36, 30AS, 375, 1895
Marlin Camp 9, Camp 45, 62 Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning .22 Stalker, Micro Medallion, WSM
-Browning A-Bolt & A-Bolt II Long Action
-Browning A-Bolt Short Action, A-Bolt .22, A-Bolt .22 Mag
-Sako A7
-Steyr SBS, Pro Hunter Buy Now
Accessory kit for the TORIC 30mm riflescope includes everything you need to maximize your long range set up. Includes Tenebraex Tactical Tough Scope Covers, MK Machining Polymer Throw Lever and Bubble Level. Detailed specifications for each item included in the kit can be found on the individual item product pages. DOES NOT INCLUDE RINGS Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look and allows the shooter to utilize the open sights when the scope is removed by looking over the top of the bases without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Also fits:
Carl Gustaf 2000
Navy Arms Country Boy Muzzleloader
Remington 783
Ruger American Centerfire Long Action
Ruger American Centerfire Short Action
Savage 10, 11, 12, 14, 16
Savage 110, 111, 112, 114, 116
Savage 220F Slug Gun
Savage Axis, Axis ll, Edge w/6-48 screws
Savage New 110 Long Action
Savage New 110 Short Action
Shilen Round Receiver
Stevens 2000, 200
Stiller Predator
Thompson Center Venture
Winchester Super XII, Super 99 Shotgun Buy Now
Standard Non Sloped Base -
Warne Mountain Tech Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available.
Also fits:
-Bergara B-14 Short Action
-Christensen Arms Bolt, Short Action Rem 700 style
-CVA Paramount Muzzleloader
-Remington 700 Short Action Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Fits:
Weatherby Mark V Standard 6 lug including 240WM Buy Now
High Profile turret Kit replaces the factory Medium profile turret providing a Zero Stop and Lock. Kit for use with the TEKOA and TURION riflescopes. Provides a single rotation of 17.5-18 MOA of adjustment. Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Bergara B-14 Long Action
-Bergara B-14 Short Action
-BSA Monarch Round Receiver
-Christensen Arms Bolt, Long Action Rem 700 style
-Christensen Arms Bolt, Short Action Rem 700 style
-Churchill Highlander
-CVA Paramount Muzzleloader
-Herters U-9 Round Top (drilled and tapped)
-Howa 1500 & 1700 Long Action
-Howa 1500 & 1700 Short Action
-Howa Mini Action
-Mauser Model 18
-Mossberg 1500, 1700
-Nosler M48 Long Action
-Nosler M48 Short Action
-Raptor Arms Remington 700 Long Style
-Remington 700 Long Action
-Remington 700 Short Action
-Remington 78, 721, 722, 725, Muzzleloader
-Sauer 100, 101
-Smith & Wesson 1500, 1600, 1700
-Weatherby Vanguard Long Action
-Weatherby Vanguard Short Action Buy Now
Warne Mountain Tech Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available.
Also fits:
-Bergara B-14 Short Action
-Christensen Arms Bolt, Short Action Rem 700 style
-CVA Paramount Muzzleloader
-Remington 700 Short Action Buy Now
Warne Mountain Tech Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available.
Also fits:
Bergara B-14 Long Action
Christensen Arms Bolt, Long Action Rem 700 style
Mauser Model 18
Raptor Arms Remington 700 Long Style
Remington 700 Long Action
Sauer 100, 101 Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-20X50 and 3-15X50 models
Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-25x50 models
Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4.5-30x56 models
Buy Now
Warne Mountain Tech rails offer shooters the advantage of a consistent mounting platform across multiple firearms, enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle.
Fits
-Savage 10, 11, 12, 14, 16
-Savage New 110 Short Action Buy Now
Warne Mountain Tech rails offer shooters the advantage of a consistent mounting platform across multiple firearms, enhanced ability to adjust proper eye relief and superior alignment of ring mounts. With self-centering hardware and aerospace grade materials our Mountain Tech rails provide a lightweight and robust platform for your rifle.
Fits
-Savage 110, 111, 112, 114, 116
-Savage 220F Slug Gun
-Savage New 110 Long Action Buy Now
The Maxima Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a “no slip” positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place.
Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails.
Graphite Grey Color matches the TORIC rifle scopes.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .525"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
The Maxima Horizontal Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a “no slip” positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place.
Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails.
Graphite Grey Color matches the TORIC rifle scopes.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .375"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
The Maxima Horizontal Fixed Ring Series fit Weaver style cross slot bases and incorporate a Warne square stainless steel recoil control key in both the front and rear rings. This ensures a “no slip” positive recoil surface across the entire slot of the base and is capable of withstanding the heaviest of recoil. The Maxima square recoil key also protects against swaging or peening of the bases when used on softer or less durable materials. The Maxima Fixed Ring band is also substantially wider for additional clamping surface around the scope to hold the optic firmly in place.
Warne Maxima Scope Rings are designed to fit Warne bases as well as all Weaver cross slot and Mil-Spec Picatinny style bases and rails.
Graphite Grey Color matches the TORIC rifle scopes.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .25"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .375"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .250"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .525"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. The perfect solution for mounting your TORIC 4.5-30x56 to your Flat Top AR/MSR Rifle when a sloped base is integrated into the Picatinny rail or a sloped base/rail is not required. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a 1.40" clearance from where the ring meets the base to the centerline of the scope. Black Matte
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. The perfect solution for mounting your TORIC 4.5-30x56 to your Flat Top AR/MSR Rifle when a sloped base is integrated into the Picatinny rail or a sloped base/rail is not required. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a 1.22" clearance from where the ring meets the base to the centerline of the scope. Black Matte
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. The perfect solution for mounting your TORIC 4.5-30x56 to your Flat Top AR/MSR Rifle when a sloped base is integrated into the Picatinny rail or a sloped base/rail is not required. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a 1.07" clearance from where the ring meets the base to the centerline of the scope. Black Matte
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. The perfect solution for mounting your TORIC 4.5-30x56 to your Flat Top AR/MSR Rifle when a sloped base is integrated into the Picatinny rail or a sloped base/rail is not required. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a .944" clearance from where the ring meets the base to the centerline of the scope. Black Matte
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat Black Matte anodized finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a 1.14" clearance from where the ring meets the base to the centerline of the scope.
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat anodized Black Matte finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a .990" clearance from where the ring meets the base to the centerline of the scope.
Buy Now
Custom Sniper Grey Cerakote to match your TORIC scope. Precision CNC machined from 7075/T6 aluminum for a high strength & lightweight platform, Mil-Spec hardcoat anodized Black Matte finish for abrasion and corrosion resistance.
Rings feature stainless steel hardware for “Element Proof” protection.
Mil-Spec 1/2″ tactical nut attachments for securely clamping to the rail require 65in/lbs of torque while the ring cap screws require a maximum of 18-20in/lbs. Fits Picatinny & Weaver style mounts and are NATO-STANAG compatible.
Provides a .885" clearance from where the ring meets the base to the centerline of the scope.
Buy Now
Professional light weight, compact, high strength, tripod using 8 layer carbon fiber tube, 62" tall, 3 segment legs for maximum strength and an Ultra Smooth pan head with a counter weighted motion system.
The comfortably long hand is reversible for both left and right hand users. The bubble level in the base assures proper azmith alignment for video and nightscape panning shots.
Designed specifically for spotting scopes and digiscoping using 32mm diameter legs which provides for maximum strength and stability while still being the lightest in it's class. Total weight of tripod and pan head - 5.4 lbs Buy Now
Based on Warne's innovative R.A.M.P. Mount platform, the Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and we’ve been able to reduce the weight by over 30%, compared to our R.A.M.P. Mount by utilizing a skeletonized body and ring caps. The X-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount, as well as a 1 piece side clamp design for additional strength. The extra cantilever provides proper eye relief when using scopes with large eye boxes and will give extra space behind the mount for accessories Buy Now
Based on Warne's innovative R.A.M.P. Mount platform, the Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and we’ve been able to reduce the weight by over 30%, compared to our R.A.M.P. Mount by utilizing a skeletonized body and ring caps. The X-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount, as well as a 1 piece side clamp design for additional strength. The extra cantilever provides proper eye relief when using scopes with large eye boxes and will give extra space behind the mount for accessories Buy Now
Based on Warne's innovative R.A.M.P. Mount platform, the Gen II Edition has all the features you need. The X-SKEL Mount with built in 20 MOA slope offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and we’ve been able to reduce the weight by over 30%, compared to our R.A.M.P. Mount by utilizing a skeletonized body and ring caps. The X-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount, as well as a 1 piece side clamp design for additional strength. The extra cantilever provides proper eye relief when using scopes with large eye boxes and will give extra space behind the mount for accessories Buy Now
The Real Avid SMART TORQ is the most precise and technically advanced torque driver for firearms, especially optics mounting and gun builds. Discrete inch-pound increment settings provide spot-on torque adjustments while a comfortable ergonomic grip with Force Assist makes tool manipulation a breeze. The functionally intuitive torque setting with visual, tactile, and audible feedback provides confident assurance. To get you started, Smart Torq comes with 12 of the most commonly used gun bits. 10-70 lb range. Never over torque a scope ring again! Buy Now
The Window Mount is an integral tool for those who spend a lot of time scouting and glassing from a vehicle. Antelope hunting in Wyoming, for example, is when you may spend hours in the truck to cover as much ground as possible. And this spotting scope mounts to virtually any vehicle window safely and securely. The adjustable angle top plate allows the optic to remain horizontal at all viewing angles. Plus, it can be used with virtually any binocular when used along with our Binocular Tripod Mount (sold separately). Buy Now
Bull elk and mule deer bucks live in big country. And sometimes a hunter can’t get close enough for a preferable shot. That’s why we’ve developed the TORIC 30mm FFP 4-20X50 MOA rifle scope, which is specifically designed for the hunter who needs to shoot longer distances. It features our proprietary Ultra High Definition (UHD) optical system consisting of SCHOTT High Transmission (HT) glass for unparalleled clarity and light transmission.
The reticle is broken up into 1 MOA increments with larger hash marks indicating 5 MOA increments. It provides the accuracy and precision to make long distances only a number. Like all TORIC rifle scopes, it was designed and engineered here in the U.S. and built in Japan by the world’s leading optical manufacturer.
Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Fits:
Weatherby Mark V Magnum 9 Lug Except 240 WM Buy Now
