Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look and allows the shooter to utilize the open sights when the scope is removed by looking over the top of the bases without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Also fits:
Carl Gustaf 2000
Navy Arms Country Boy Muzzleloader
Remington 783
Ruger American Centerfire Long Action
Ruger American Centerfire Short Action
Savage 10, 11, 12, 14, 16
Savage 110, 111, 112, 114, 116
Savage 220F Slug Gun
Savage Axis, Axis ll, Edge w/6-48 screws
Savage New 110 Long Action
Savage New 110 Short Action
Shilen Round Receiver
Stevens 2000, 200
Stiller Predator
Thompson Center Venture
Winchester Super XII, Super 99 Shotgun Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Benelli R1, Argo
-Browning BAR, BAR II, Mark II
-Browning BPR (Pump), Mark l
-Sauer SHR Pro Hunter
-Savage 40, 45
-Winchester SXR
Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning X-Bolt Long Action
-Browning X-Bolt Magnum Action: 300RUM, 300PRC, 375H&H
-Browning X-Bolt Short Action
-Browning X-Bolt Super Short Action Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
Henry Repeating Arms Lever Gun H009, H010, H014
Marlin 1894, 444, Glenfield 30, Zane Grey
Marlin 336, 336C, 36, 30AS, 375, 1895
Marlin Camp 9, Camp 45, 62 Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning .22 Stalker, Micro Medallion, WSM
-Browning A-Bolt & A-Bolt II Long Action
-Browning A-Bolt Short Action, A-Bolt .22, A-Bolt .22 Mag
-Sako A7
-Steyr SBS, Pro Hunter Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning BBR
-Cooey 71
-Enfield Winchester 70 Style
-Kimber Of Oregon M89 BGR
-Marlin XL-7
-Marlin XS-7
-Montana Montana action (Drilled and tapped round receiver)
-Sears 53
-Winchester 670, 770
-Winchester Model 70 Long Action
-Winchester Model 70 Short Action
-Winchester Model 70 WSM Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Browning AB3 Long Action
-Browning AB3 Short Action
-HS Precision Savage Style Long Action (8-40 Screws)
-HS Precision Savage Style Short Action (8-40 Screws)
-Pierce Actions drilled for 8-40 screws
-Savage 110 BA (338 Lapua), 110 FCP (338 Lapua)
-Savage New 110 Long Action w/8-40 screws
-Savage New 110 Short Action w/8-40 screws Buy Now
Warne Maxima Steel Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available. Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Also fits:
-Bergara B-14 Long Action
-Bergara B-14 Short Action
-BSA Monarch Round Receiver
-Christensen Arms Bolt, Long Action Rem 700 style
-Christensen Arms Bolt, Short Action Rem 700 style
-Churchill Highlander
-CVA Paramount Muzzleloader
-Herters U-9 Round Top (drilled and tapped)
-Howa 1500 & 1700 Long Action
-Howa 1500 & 1700 Short Action
-Howa Mini Action
-Mauser Model 18
-Mossberg 1500, 1700
-Nosler M48 Long Action
-Nosler M48 Short Action
-Raptor Arms Remington 700 Long Style
-Remington 700 Long Action
-Remington 700 Short Action
-Remington 78, 721, 722, 725, Muzzleloader
-Sauer 100, 101
-Smith & Wesson 1500, 1600, 1700
-Weatherby Vanguard Long Action
-Weatherby Vanguard Short Action Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look allowing the shooter to utilize the open sights by looking over the top of the bases when the scope is removed without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Fits: Tikka T3, T3x - Not for use with Tikka Dovetail rings
Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look allowing the shooter to utilize the open sights by looking over the top of the bases when the scope is removed without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Fits:
Savage Axis, Axis ll, Edge w/6-48 screws Buy Now
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today. The low profile of the Maxima Steel Bases give your firearm a sleek look allowing the shooter to utilize the open sights by looking over the top of the bases when the scope is removed without sacrificing the normal shooting position behind the firearm.
Maxima Bases also offer a full width recoil slot in each base. This feature allows the recoil control keys of Warne Rings to attain maximum bearing surface.
Fits Tikka T3, T3x - Not for use with Tikka Dovetail rings Buy Now
The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear.
Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE! Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-20X50 and 3-15X50 models
Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4-25x50 models
Buy Now
Mirage caps aid reading mirage over a longer distance. Reducing the objective diameter of a scope has the same effect as changing the “F” setting on a manual camera. The result allows less light and increases the depth of field, allowing you to read mirage over a much longer distance. With your objective lens at full diameter you are reading mirage over only a few yards. The mirage may have stopped or actually be running in the opposite direction closer to the firing line. Shooters notice the lines on the target are more defined with the mirage cap in place, especially on hot afternoons with heavy mirage. The mirage caps may be a disadvantage during dark cloudy days or any other low light conditions where mirage can’t be seen or read. The article below is a great source for explaining mirage and reading mirage, you may want to pay close attention to the last paragraph of the article. Fits TORIC 4.5-30x56 models
Buy Now
The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear. Pull tab allows for quick and easy removal.
Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE! Buy Now
The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear. Pull tab allows for quick and easy removal. DOES NOT fit the TORIC 30mm 1-8X24 LPVO
Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE! Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Fits:
Weatherby Mark V Standard 6 lug including 240WM Buy Now
Developed and engineered to provide you with a strong and economical mounting solution that outperforms other mounts in their class. Cantilever design provides the proper height, eye relief and charging handle access for your AR/MSR. Made of Lightweight Aluminum. 4.7 Ounces. Fits most AR-15, AR-10, MSR as well a Bolt action rifles with full picatinny rails and adjustable stocks.
Buy Now
Compact, Lightweight Ballistic Nylon case design provides a protective, storage solution for your TRACT binoculars. Fits 8x42 and 10X42 TORIC models, but will easily accommodate most binoculars with 42mm objectives. Buy Now
Compact, Lightweight Ballistic Nylon case design provides a protective, storage solution for your TRACT binoculars. Fits 10x50 and 12.5x50 TORIC models, but will easily accommodate most binoculars with 50mm objectives. Buy Now
The EYESHIELD is a flexible molded rubber material that connects to the eye piece of the binocular. The EYESHIELD cradles your eye and prevents ambient light from entering into the space between your eye and the binocular eyepiece that causes lens glare. An added benefit is the EYESHIELD protects the eyes from wind, rain, snow and dust. This is a must have for everyone who uses binoculars. Fits all TORIC binoculars. Made of Santaprene. A type of neoprene.
Buy Now
Upgrade your optic with one of these slick throw levers, speeding up magnification changes and target engagements without breaking the bank. Produced to exacting tolerances to match the magnification ring of your TRACT TORIC 34mm 4-25x50 scope. Proudly printed in the USA by our friends at MK Machining from a durable Custom Nylon Blend and features a metal thread insert for increased strength when tightening. Install in a minute or less, and come with a lifetime warranty. Custom made to fit TORIC 34mm 4-25x50. Will not fit any other TRACT Rifle Scopes Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .375"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .250"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .525"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws Buy Now
Upgrade your optic with one of these slick throw levers, speeding up magnification changes and target engagements without breaking the bank. Produced to exacting tolerances to match the magnification ring of your TRACT TORIC or TEKOA scope. Proudly printed in the USA by our friends at MK Machining from a durable Custom Nylon Blend and features a metal thread insert for increased strength when tightening. Install in a minute or less, and come with a lifetime warranty. Custom made to fit TORIC (34mm 4.5-30x56, all 30mm and 1" models) as well as all TEKOA scopes without removing the scope from the firearm. Will not fit the TORIC 34mm 4-25x50 Buy Now
Customized to match your TORIC riflescope, the Graphite T-51 mount is the perfect complement to your AR/MSR. TRACT designers worked hand in hand with Warne engineers to develop the ultimate AR/MSR mount solution and the result is the RESPONSE mount. Made from lightweight precision machined 6061 aluminum the RESPONSE mount is the perfect match for your RESPONSE riflescope, but will work equally well with any brand riflescope on any flat top, Picatinny or Weaver rail. Base screws require 65in lbs of torque and come with a non permanent thread locking compound on the threads to eliminate the screws from working loose under repeated recoil. The ring screws require 25in lbs of torque. No thread locking compound is necessary on the ring screws. Weight - 6 ozs. Mount Height - Centerline of the ring to where it meets the base – 1.4” Buy Now
Save 15% when you purchase the kit. Binocular. Kit Includes Bino Harness with Quick Release Feature, LensPen and Padded Storage Case. (Case fits 50mm Objective models Only) Buy Now
The new GEN 2 Rapid-Release Tripod Adapter from our partners at Field Optics Research allows for quick and easy connect/disconnect of your binocular to your tripod. Unlike others, it can't fall off! This binocular tripod adapter will fit any brand binocular with a 1/4-20 connection. (usually hidden under a plastic cap in the hinge of your binocular). No QR plate is required with our 3-way base. Which easily fits any Arca Swiss, Manfrotto 200PL, and 1/4-20 mounting options.
Buy Now
Hunting in bigger country requires a binocular with a larger magnification. When it comes to a 10x hunting binocular, the award-winning TORIC 10x42 provides a wide field of view, superior light transmission, and a level of durability you won’t find in this price class. From the Great Plains to the Rocky Mountains, the TORIC 10x42 that’s guaranteed to perform no matter the weather or lighting conditions. Buy Now
30mm XLP (Xtreme Low Profile) aluminum billet bubble level made for us by MK Machining utilizes minimal space taking up only .3" of the scope tube and requires less than .200″ of clearance between the scope and and rail for installation without removal. Precise vial placement is visible, yet does not protrude beyond turrets and is sensitive even in sub-zero temperatures. The Vial head has windows on all four sides to let in the maximum amount of light for excellent visibility, even in low light scenarios, while simultaneously keeping the vial protected from impacts. The level indicator is laser etched for a quicker reference versus trying to center between the standard black lines. The XLP levels are milled from 6061 Aluminum and assembled right here in the USA!
Weighs just 4ozs. Buy Now
34mm XLP (Xtreme Low Profile) aluminum billet bubble level made for us by MK Machining utilizes minimal space taking up only .3" of the scope tube and requires less than .200″ of clearance between the scope and and rail for installation without removal. Precise vial placement is visible, yet does not protrude beyond turrets and is sensitive even in sub-zero temperatures. The Vial head has windows on all four sides to let in the maximum amount of light for excellent visibility, even in low light scenarios, while simultaneously keeping the vial protected from impacts. The level indicator is laser etched for a quicker reference versus trying to center between the standard black lines. The XLP levels are milled from 6061 Aluminum and assembled right here in the USA!
Weighs just 4ozs. Buy Now
Warne Maxima steel bases are the strongest and most versatile mounting system available today. The simple low profile design along with steel construction is a significant upgrade from any other 2 piece bases.
The Maxima Steel Bases are modeled around the popular Weaver design, which is one of the strongest and most versatile mounting systems available today.
Fits:
Weatherby Mark V Magnum 9 Lug Except 240 WM Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.25" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.00" height (centerline of the ring to where it meets the base) Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.5" height (centerline of the ring to where it meets the base) The perfect height for full Picatinny rails and Flat Top AR's. Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now
Modular Driven Technologies Premier Scope Rings offer a solid, light weight mounting system for your optics. Made from precision-machined aluminum. Stepped base-to-cap interface allows the fasteners on one side to be tightened before making final scope alignment adjustments
Four oversized #8-32 Grade 8 fasteners used for clamping the scope
MDT Premier Scope Rings are designed and manufactured to STANAG 4694 specification, also known as “NATO spec”. This means the scope ring sits tight to the top of the scope base rail, with pressure being applied to the underside of the angled rail surfaces to maintain a solid interface (as shown below). This design also allows mounting on out-of-spec rails. Provides a 1.5" height (centerline of the ring to where it meets the base) The perfect height for full Picatinny rails and Flat Top AR's. Fits multi slot bases and Picatinny rails. Will not work with single slot bases.
Buy Now