The TEKOA HD 4-16x44 with a BDC reticle is built for hunters and shooters wanting to get a little more range out of their rifle scope. It incorporates SCHOTT HT (high transmission) glass and TRACT's High Definition technology for improved image quality and superior light transmission performance. The TEKOA scopes are built in Japan with precision components to the highest tolerances by one of the leading optical manufacturers in the world. When you need a fail-safe option for the eastern hardwoods or western plains, TEKOA HD 4-16x44 with a BDC reticle should be a top contender.
This workhorse of a riflescope with SCHOTT HT (High Transmission) glass and a fully multi-coated optical system delivers excellent low light performance and detail resolution in all situations and weather conditions.
Glass-etched BDC Reticle
When you need a reticle with accurate bullet drop compensation (BDC) and windage correction, the glass-etched Impact BDC reticle is it. The strategically placed ½ MOA BDC dots and pointed post bracketing system provide bullet drop compensation with a definitive aiming point that does not obscure the target, even at long range. The horizontal pointed posts allow you to bracket the target, making it easier to hold slightly higher or lower on the target. The reticle is set up for both standard (2,800 fps) and magnum cartridge (3,000 fps) trajectory in approximate 100 yard increments. Simply sight a standard cartridge to 100 yards and a magnum at 200 yards. Or, to customize the reticle to your exact load, calculate the exact distance each dot represents by entering your cartridge info into the IMPACT Ballistic Program.
Product Overview
Description
The TEKOA HD 4-16x44 with a BDC reticle is built for hunters and shooters wanting to get a little more range out of their rifle scope. It incorporates SCHOTT HT (high transmission) glass and TRACT's High Definition technology for improved image quality and superior light transmission performance. The TEKOA scopes are built in Japan with precision components to the highest tolerances by one of the leading optical manufacturers in the world. When you need a fail-safe option for the eastern hardwoods or western plains, TEKOA HD 4-16x44 with a BDC reticle should be a top contender.
Product Specs
TEKOA HD 4-16x44 BDC
Magnification
4-16X
Objective Lens Diameter
44mm
Eye Relief (inches)
3.5
Exit Pupil
9.3 / 2.8
Field of View (Low Power/High Power in feet @ 100 yards)
Operating range says down to -1.8F. I am in Montana and often out walking in -10 or colder, what problems could happen?
Question by: richard rawland thompson on Dec 2, 2022, 1:46 PM
This is the standard operating temperature. The product will still function normally at lower temperatures but things like the magnification ring and eyepiece focus may become stiffer to turn
Answer by: Jon LaCorte (Admin) on Dec 2, 2022, 2:59 PM
What mounting materials will I need to place this on a savage ultralight 6.5 Creedmore…ring height suggested, etc.?
Question by: Barry Campbell on Jan 8, 2023, 12:53 AM
We have the 2 piece bases for the Savage and we also offer Medium height rings. This would be all you need to mount the TEKOA scope. Both can be found under accessories.
Answer by: Jon LaCorte (Admin) on Jan 8, 2023, 6:43 AM
Does this model have a zero stop on elevation turret?
Question by: Jason K on Jan 27, 2023, 10:40 AM
The TEKOA standard turret does not feature a zero stop, but you can add the high profile turret kit as an accessory that has a turret lock and single rotation zero stop
Answer by: Jon LaCorte (Admin) on Jan 27, 2023, 10:52 AM
Will a low ring height allow this to be mounted to a rifle with a picatinny rail and a 70 degree bolt throw… or does it need a medium height ring
Question by: Jim Foster on Mar 9, 2023, 6:56 PM
This is difficult to answer without knowing which rifle you are referring to. There are some variables to consider. What actual brand of rings are you considering....low for some brands is not the same height as low for others. Also, where you need to set the scope for proper eye relief might cause the eyepiece to hit the base. What type of barrel contour? For this reason we usually recommend Medium rings. Feel free to email what rifle and rings you plan to use and we will do our best to see if the low rings might work. [email protected]
Answer by: Jon LaCorte (Admin) on Mar 9, 2023, 7:30 PM
High Profile turret Kit replaces the factory Medium profile turret providing a Zero Stop and Lock. Kit for use with the TEKOA and TURION riflescopes. Provides a single rotation of 17.5-18 MOA of adjustment.
The original Scopecoat® by SENTRY, is the scope cover widely used and trusted in the industry by leading optics manufacturers and consumers, and has been for decades. Made from 6MM thick Neoprene, a material commonly used in wet suits, which conforms to the shape upon which it is placed. Our Neoprene/Nylon laminate composition assists in repelling moisture and condensation away from your optic as well as dirt and debris. This combination helps to protect your optics from the elements and damage while out in the field or when storing your gear.
Made in the U.S.A. and backed by a no questions asked LIFETIME GUARANTEE!
2" sunshade threads easily into the objective of the TEKOA 44mm riflescope minimizing glare and reflections. Fits TEKOA riflescopes with a 44mm objective. Color : Black Matte
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .375"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws
CNC machined from sintered steel for superior strength and clamping benefits.
Square, permanently installed recoil keys for positive engagement of ring to base.
Rings mount securely around scope using 4 Torx T-15 cap screws, 2 screws for each clamp.
STANAG 4694 interface allows for better return to zero and rigidity.
Fits both Picatinny & Weaver style bases.
Designed and Made in USA.
Height from bottom of the ring where it meets the scope tube to where it meets the base - .525"
WE RECOMMEND NO MORE THEN 18 INCH LBS of Torque when tightening the ring screws
Warne Maxima Steel Bases - Are modeled around the popular Weaver design which is one of the most durable, strongest and most versatile mounting systems available.
The Rifle Scope Bubble Level eliminates canting of the rifle and provides a greater degree of long range accuracy. High-visibility fluorescent fluid provides excellent visibility in a just about any light conditions. Fits virtually any 1-inch riflescope and can be mounted in most cases without removing the scope. Can be mounted in front or behind the elevation turret and is also designed to fit right- or left-handed shooters.